Metal Mold Release Oil
*By preventing sticking that will occur between the fresh concrete and the metal mold, it allows the mold to be separated from the concrete more easily.
*Mould release oil is used to obtain concrete with a smoother surface.
* It provides a clean and easy separation of the mold.
* It prevents the mold from being worn out and ensures its use with high efficiency and prolongs its service life.
*Reduces contamination on the concrete surface.
* The application is quite simple.
* Simplifies the placement of concrete in the mold and the removal of air bubbles.
It is applied by spraying, brush or roller in all weather conditions. Before use, the molds should be dry and clean, free from concrete and rust residues. Freshly applied mold surfaces should be protected from rain before concreting. Depending on the condition, surface and type of the mold (wood, plastic, etc.), 20-30 m² of surface is covered with 1 liter. For best performance, the product should be allowed to form a thin layer. Since excessive use of oil may cause staining on the concrete, excessive oil should be cleaned with sponges, cloths, etc.
Amount of usage
It is used without dilution.