Protection and Coating Product for Concrete Surfaces
* ENDOV EPOXY ensures a longer life of the concrete by providing adhesion between cement and fillers.
* Prevents crumbling.
* Water does not penetrate the applied concrete.
* It prevents the formation of cracks and scratches by hardening the concrete.
* Protects against many oils, some acids, alkalis and dust.
By using a 200-250 rpm drill; 70% of ENDOV EPOXY (A) and 30% of ENDOV EPOXY (B) is taken and mixed in a bowl for 15-20 minutes. The prepared mixture should be applied to the surface within 45 minutes. The concrete surfaces to be applied must be dry and clean. On new concrete: 30 days after application, it is applied with an ideal 2 coated brush or roller at intervals of 24 hours on average. The surfaces should be burr-free. In aged concrete: The surfaces must be cleaned and cleansed from all kinds of oil, dirt and curing materials. Large cracks, holes and similar areas on the surfaces must be filled and eliminated. The application is same as above.
Amount of usage
For each layer, an average of 0.75-1 kg of product is used per 1 m².